www.onSale247.co.nz

PRODUCT CATEGORY

Installation Guide

Home

Our Products

Our Shelving

Eco-Friendly

Testimonials

About Us

Our Products

Melamine Shelving

Melamine Colours

Acrylic Shelving

Custom Sizes

Shelving Prices

Shelving Enhancers

Photo Slideshow

HELP DESK

FAQ's

Installation Guide

Order & Payment

Colour Samples

Information

Create your own designer look in just a few easy steps…..

Preparations:

1. It is preferable to find a wall stud to attach the Wall-mount wall bracket

2. Hold the Wall Mount wall bracket on the wall where you want the shelf to be ensuring it is level as this is how your shelf will sit when clicked in

3. Mark the wall through the drill holes on the Wall Mount wall bracket showing where the screws are to be.  Put the Wall Mount down

4. Test if your marks are also where a wall stud might be by gently drilling in one of the wall stud screws.  You will know if it has hit a wall stud, as the screw will be firmer and obviously gripping something (refer Option 1 below).  Do not put the screw all the way in

5. Remove the screw and repeat this test on each of your marks

6. Where there is no grip you are screwing only into Gib Board (refer Option 2 below)

7. For concrete or concrete block walls (refer Option 3 below)

Please note:

The deeper the shelf the greater the leverage therefore particular attention needs to be paid
to attaching the wall bracket, this may entail more attachments to ensure the shelf remains secure against the wall and does not sag once the shelf is attached and loaded.

Option One
For Walls with Timber Studs

1. Position the Wall Mount on the wall

2. Where you know there is a wall stud use the wall stud screw

3. Do not tighten until al the other screws have been loosely attached

4. Gently tighten until the Wall Mount is firmly attached to the wall

5. Click on the Shelving

 

Option Two
For Gib Board Walls

 

1. Use an 8mm drill bit and gently drill a hole to fit the wall anchor

2. Gently put the wall anchor in to the hole and firmly push so the face of the anchor is locked into the gib board and is sitting flat with the wall

3. Position the Wall Mount wall bracket using the three anchor screws

4. Do not tighten until all the other screws have been loosely attached

5. Gently tighten until the Wall Mount is firmly attached to the wall

6. Click on the Shelving

 

Option Three

For Concrete or Concrete Block Walls

 

1. Use a 6mm masonry drill bit and gently drill a hole to fit the wall anchor.  Make sure the hole is long enough to hold the screw not just the wall anchor

2. Gently put the wall anchor in to the hole and firmly push so the face of the anchor is locked into the gib board and is sitting flat with the wall

3. Position the Wall Mount wall bracket using the three anchor screws

4. Do not tighten until all the other screws have been loosely attached

5. Gently tighten until the Wall Mount is firmly attached to the wall

6. Click on the Shelving

To download & print

The trading website OnSale247.co.nz is part of Zapwall Group Ltd
The information provided by this website is subject to change without notice.

Copyright © 1998-2010, All rights reserved.